Toilet Seat
Installation Guide
LSeat-004
LSeat-001
duroplast
duroplast
LSeat-005
LSeat-002
duroplast
plastic
LSeat-006
LSeat-003
plastic
duroplast
2014-10
1 866 907 0122
blubathworks.com
Toilet Seat Installation Instructions
LSeat-001 · LSeat-002 · LSeat-003 · LSeat-004 · LSeat-005
3
1
1
2
3
4
5
4
2
5
Hinge Adjustment
•
•
Maximum adjustment of the pin position is
achieved by rotating the hinge anchor around the
screw (adjustment A in the parts diagram above.)
Further fine adjustment of the pin position can be
achieved by sliding the screw in the adjustment
plate (adjustment B).
2014-10
1 866 907 0122
blubathworks.com
2
Fixing the Hinge Anchor
•
Place the Top Fix Inserts into the fixing holes. Insert the
screws within the Hinge Anchors as shown and begin
to tighten the screws until they are loosely secured to
allow for adjustment of the seat.
1
•
Make sure round
rubber gasket is
underneath hinge.
•
Insert the expansion
rubbers/plastic inserts
into the hinge holes of
the toilet.
1a
1b
Fitting the Seat
2
2a
2b
2c
Quick-Release Mechanism
•
This toilet seat is designed for quick and easy removal when cleaning
the toilet. To activate the quick release lift the lid, seat up and press the
button in the centre of the hinges and lift.
3
•
•
To replace the seat, align the sockets with the pin and firmly press into
position.
LSeat-002 is designed to activate the quick release with NO BUTTON.
To release, lift lid and seat up, then pull up.
2014-10
1 866 907 0122
blubathworks.com
3
Toilet Seat Installation Instructions
LSeat-006
Affix the Fixed Board
1
•
Install the screw set and fixed board accordingly. Tighten the fixed
board slowly into the bowl on both sides simultaneously with a flat
screwdriver.
Position the Seat & Cover
2
•
Align the hinge post with the fixed board, then slot the seat and cover
into the fixed board (refer to fig. 2.) Ensure that the seat is securely in
place.
Fitting the Seat
3
•
Tighten the screws in the front holes of the hinge post with a phillips
screwdriver, then tighten to fix the seat and cover in place.
2014-10
1 866 907 0122
blubathworks.com
4
Toilet Seat Maintenance
•
•
Wipe the toilet seat with a soft wet cloth
Clean the toilet seat with a neutral cleanser, and then dry it with a clean cloth
Caution
•
•
•
•
•
Do not stand on the lid or ring of your toilet seat
Do not use any abrasive cleaning agents
Keep toilet seat away from chemicals and cosmetics
Please do not close the seat or cover forcibly to extend the soft-close function lifespan.
Please do not clean the seat or cover with strong chemical cleansers or scouring brushes to avoid harming the seat & cover
2014-10
1 866 907 0122
blubathworks.com
5
LSeat-001
11 3/4"
[300]
14 1/4" 5"-8 1/2"
[359] [126-214]
8 1/2"
[217]
17 1/4"-18 3/4"
[435-479]
18"
[460]
1 1/2"
[39]
2 1/4"
[57]
2014-10
1 866 907 0122
blubathworks.com
6
LSeat-002
11 3/4"
[300]
14 1/4" 5"-8 1/2"
[359] [126-214]
8 1/2"
[217]
17 1/4"-18 3/4"
[435-479]
18"
[460]
1 1/2"
[39]
2 1/4"
[57]
2014-10
1 866 907 0122
blubathworks.com
7
LSeat-003
Scale 1:10
USLETTER (8.5 x11)
11 1/2"
[290]
8 1/4"
[211]
14"
[356]
4 3/4"-8 1/2"
[124-216]
16 1/4"-18"
[412-458]
17 3/4"
[449]
1 1/2"
[41]
2"
[48]
2014-10
1 866 907 0122
blubathworks.com
8
LSeat-004
11 3/4"
[300]
14 1/4" 5"-8 1/2"
[359] [126-214]
8 1/2"
[217]
17 1/4"-18 3/4"
[435-479]
18"
[460]
1 1/2"
[38]
2"
[50]
2014-10
1 866 907 0122
blubathworks.com
9
LSeat-005
2014-10
1 866 907 0122
blubathworks.com
10
LSeat-006
2014-10
1 866 907 0122
blubathworks.com
11
|