™
How to use your
FlushIQ
Sensor Display Alerts
How to Change the Batteries
How to Flush
Sleep Mode
Learn More
Manually
about FlushIQ™
Blue
AA Batteries
C Batteries
For more help visit
Lift off tank lid and push
down on the red, manual
To enter Sleep Mode:
Touch sensor for
7 seconds. (Toilet
will not flush while in
sleep mode. Use for
cleaning, etc.)
Normal operation-toilet is
performing a flush/fill cycle.
Remove lid by twisting
Remove box lid
1
and
To find product information visit
www.deltatoilet.com/FlushIQ
or scan the QR code to
automatically take you to our
product videos.
latch
and pulling.
adapter
to install “C”
1
2
flush rod
1
. The tank will
Install 4 “AA” batteries
in orientation shown.
batteries for longer
battery life. Reinstall lid.
not automatically refill
after manual flush.
Yellow
Leak detected.
1
1
2
Flashing Yellow
Leak detected.
(Tank fill failure.)
To exit Sleep Mode:
Touch sensor for
7 seconds or wait
for the 10 minute
time out.
Flashing Red & Blue
Overflow level detected.
Toilet will not flush.
Flashing Red
Low battery indication.
1
Flashing Blue
Toilet is in sleep mode.
Toilet will not flush.
Note: Positive terminals are to the left and negative
terminals are to the right.
76688 Rev. A
|
Xerox Docuprint C1190 Fs User Manual
Xerox C65 C75 C90 User Manual
Toshiba Eo1 33057d User Manual
Soleus Air Gm Wac 06se C User Manual
Sanyo 30k72r User Manual
Samsung As24cm1n User Manual
Ricoh Aficio 3245c User Manual
LG HT903TA User Manual
KENWOOD NX 1300N User Manual
D LINK AV500 DHP 308AV User Manual