OWNER’S INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’UTILISATION
ISTRUZIONI PER L’USO
MANUAL DE INSTRUÇÕES
GEBRAUCHSANWEISUNG
O¢H°IE™
Indoor unit
Outdoor unit
AQ07P8GE
AQ07PBGE
SH07ZPG
UQ07P8GE
UQ07PBGE
SH07ZPGX
SH07ZPGAX
UQ09P8GE
UQ09PBGE
SH09ZPGX
SH09ZPGAX
UQ12PBGE
UQ12PGGB
UQ12PGGE
SH12ZPGX
SH12ZPGAX
UQ18P0GB
UQ18P0GE
SH18ZP0X
SH18ZP0AX
UQ24P6GB
UQT24P6GE
SH24TP6X
SH24TP6AX
SH07ZPGA
AQ09P8GE
AQ09PBGE
SH09ZPG
SH09ZPGA
AQ12PBGE
AQ12PGGB
AQ12PGGE
SH12ZPG
SH12ZPGA
AQ18P0GB
AQ18P0GE
SH18ZP0
SH18ZP0A
AQ24P6GB
AQT24P6GE
SH24TP6
SH24TP6A
Split-type Room Air Conditioner (Cool and Heat)
Aire acondicionado doméstico sistema Split (Refrigeración y Calefacción)
Climatiseur de type Séparé (Refroidissement et Chauffage)
Condizionatore d’aria per ambienti ad unità Separate (Raffreddamento e Riscaldamento)
Aparelho de ar condicionado tipo Split (Refrigeração e Aquecimento)
Geteilte raumklimaanlage (Kühlen und Wärmen)
¢IAIPOYMENO K§IMATI™TIKO ¢øMATIOY(æ‡Í˘ Î·È £¤ÚÌ·ÓÛ˘)
E S F I P D G DB98-08672A(6)
Contents
◆
◆
PREPARING YOUR AIR CONDITIONER
◆◆◆Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
◆◆◆View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
◆◆◆Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . . .
◆◆◆Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
◆◆◆Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . .
2
4
6
7
8
OPERATING YOUR AIR CONDITIONER
◆◆◆Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . . . .
9
◆◆◆Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
◆◆◆Heating Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
◆◆◆Changing the Room Temperature Quickly . . . . . . . . . . . . . . . . . . 12
◆◆◆Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
◆◆◆Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
◆◆◆Selecting Energy Saving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
◆◆◆Generating Anion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
◆◆◆Adjusting the Air Flow Direction Vertically . . . . . . . . . . . . . . . . . . . 17
◆◆◆Adjusting the Air Flow Direction Horizontally . . . . . . . . . . . . . . . . 17
◆
◆
PROGRAMMING YOUR AIR CONDITIONER
◆◆◆Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
◆◆◆Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
◆◆◆Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
RECOMMENDATIONS FOR USE
◆◆◆Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
◆◆◆Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . . . . . 22
◆◆◆Operating Your Air Conditioner Without the Remote Control . . . . . 22
◆◆◆Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
◆◆◆Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
◆◆◆Cleaning Deodorizing and Bio-Green filters (option) . . . . . . . . . . . 24
◆
TECHNICAL SPECIFICATIONS
E-3
View of the Unit
The design and shape are subject to change according to the model.
Indoor Unit
Room temperature sensor
Air Inlet
Auto grille
On/Off switch
Air filter
(under the grille)
Remote Control Sensor
Air flow blades
(outlet)
Operation indicator
Set temperature &
room temperature
Timer indicator
Sleep Timer indicator
Anion indicator
Fan speed setting
No t e
◆ If you want to turn on/off the Display during operation,
press the button on the remote control.
◆ The room temperature sensor senses air temperature
around the sensor, and shows the temperature on the
display.
E-4
Outdoor Unit
UQ07P8GE
Air Outlet
UQ09P8GE
Air Inlet(Rear)
SH30ZC1(C2)X
Connection Valve
(inside)
Outdoor Unit
UQ07PBGE UQ09PBGE UQ12PBGE
Air Inlet(Rear)
Air Outlet
Connection Valve
Outdoor Unit
SH07ZPGX
SH07ZPGAX SH09ZPGX SH09ZPGAX
UQ12PGGB UQ12PGGE SH12ZPGX SH12ZPGAX
Air Inlet(Rear)
Air Outlet
Connection Valve
(inside)
Outdoor Unit
UQ18P0GB
UQ24P6GB
UQ18P0GE
UQT24P6GE SH24TP6X
SH18ZP0X
SH18ZP0AX
SH24TP6AX
Air Inlet(Rear)
Air Outlet
Connection Valve
E-5
Remote Control - Buttons and Display
Operating mode
Remote control
transmission indicator
(
AUTO,
COOL,
DRY,
FAN,
HEAT)
Battery discharge indicator
Fan speed
Turbo mode
Temperature setting
Air flow direction
Anion indicator
Sleep mode
Off Timer setting
Energy saving
On Timer setting
On/Off button
Digital i On/Off button
Temperature adjustment
buttons
Mode selection button
(AUTO, COOL, DRY, FAN, HEAT)
Swing button
Fan speed adjustment
button
Energy saving button
Turbo button
Anion button
Sleep button
On Timer button
Off Timer button
Timer Set/Cancel button
E-6
Getting Started
You have just purchased a split type air conditioner and it has been
installed by your installation specialist.
Your Owner’s Instructions contains valuable information on using your
air conditioner. Please take the time to read it as it will help you take full
advantage of the unit’s features.
The booklet is organized as follow s.
◆ The follow ing figures are show n on pages from 4 to 6 :
-
-
Indoor and outdoor units
Rem ote control(buttons and display)
They w ill help you find the buttons and understand the sym bols displayed.
◆ In the manual, you will find a series of step-by-step procedures for each
function available.
The illustrations in the step-by-step procedures use three different sym bols:
PRESS
PUSH
HOLD DOWN
E-7
Inserting the Remote Control Batteries
You m ust insert or replace the rem ote control batteries w hen :
◆ You purchase the air conditioner
◆ The rem ote control does not w ork correctly
No t e
◆ Use two AAA, LR03 1.5V batteries.
◆ Do not use old batteries or different kinds of batteries together.
◆ Batteries may be completely discharged after 12 months, even
◆ if they have not actually been used.
1
2
Push the battery cover on the rear of the remote control with your thumb
in the direction of the arrow and remove it.
Insert the two batteries, taking care to respect the polarities :
◆ + on the battery with + on the remote control.
◆ - on the battery with - on the remote control.
3
Close the cover by sliding it back until it clicks into place.
E-8
Selecting the Automatic Operating Mode
You can start the air conditioner in Autom atic m ode from your rem ote
control. In the Autom atic m ode, the optim um tem perature and the fan
speed is selected autom atically.
1
If necessary, press the
(On/Off) button.
Result:
◆ The operation indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected
when the unit was last used.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control,
press the
appears.
button on the remote control one or more times until it
Result:
◆ The indoor unit beeps each time you press the
button.
◆ The air conditioner runs in AUTO mode.
No t e
You can change modes at any time.
E-9
Cooling Your Room
You m ust select the Cool m ode if you w ish to adjust the:
◆ Cooling tem perature
◆ Fan speed w hen cooling
1
If necessary, press the
(On/Off) button.
Result: The operation indicator on the indoor unit lights up.
◆
◆ The air conditioner starts up in the mode selected
when the unit was last used.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control,
press the
appears.
button on the remote control one or more times until it
Result:
◆
◆
The indoor unit beeps each time you press the
The air conditioner runs in COOL mode.
button.
No t e
You can change modes at any time.
3
To adjust the temperature, press the
the required temperature is displayed.
button one or more times until
Possible temperatures are between 18°C and 30°C inclusive.
Result: Each time you press the button:
◆
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆ The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature.
◆ If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
4
Select the fan speed by pressing the
until the required setting is displayed:
button one or more times
Automatic (rotated :
)
Low
Medium
High
Result:
Each time you press the
beeps.
button, the indoor unit
5
To control the direction of the air flow, refer to page 17.
E-10
Heating Your Room
You m ust select the Heat m ode if you w ish to adjust the:
◆ Heating tem perature
◆ Fan speed w hen heating
1
If necessary, press the
(On/Off) button.
Result: The operation indicator on the indoor unit lights up.
◆
◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The indoor unit beeps.
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
IMPORTANT
◆ Plugged in
◆ Stopped
It will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control, press the
button on the remote control one or more times until it appears.
Result:
◆
◆
The indoor unit beeps each time you press the
The air conditioner runs in HEAT mode.
button.
No t e
You can change modes at any time.
3
To adjust the temperature, press the
button one or more times
until the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result: ◆ Each time you press the button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆ The air conditioner starts heating, provided that the room
temperature is lower than the desired temperature
(selected temperature+3°C).
◆ If the room temperature reaches the set temperature, the air
conditioner stops heating, but the fan is still operating.
4
Select the fan speed by pressing the
until the required setting is displayed:
button one or more times
)
Automatic (rotated :
Low
Medium
High
Result:
◆
◆
Each time you press the
button, the indoor unit beeps.
For the first three to five minutes, the fan operates very
slowly until the air has been sufficiently warmed. Once the
correct temperature has been reached, the fan is automatically
set to the required speed.
5
To control the direction of the air flow, refer to page 17.
E-11
Changing the Room Temperature Quickly
The Turbo cooling/ heating function is used to cool or heat your room as
quickly as possible.
Exa m p le : You have just com e hom e and find that the room is very
hot. You w ish to cool it dow n as quickly as possible.
The Turbo function operates for 30 minutes with the maximum settings before
returning automatically to the mode and temperature previously selected.
1
If necessary, press the
(On/Off) button.
Result:
◆ The operation indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected when the unit
was last used.
◆ The indoor unit beeps.
2
Press the
Result:
button.
◆ The temperature and fan settings are adjusted automatically.
◆ The air conditioner cools or heats the room as quickly as possible.
◆ After 30 minutes, the air conditioner is reset automatically to the
previous mode, temperature and fan settings.
But, if you press the
button in DRY or FAN mode,
it will change to AUTO mode automatically.
3
4
If you wish to stop the Turbo function before the end of the 30-minute period,
press the
button again.
Result:
The air conditioner is reset automatically to the previous mode,
temperature and fan settings.
To control the direction of the air flow, refer to page 17.
E-12
Removing Excess Humidity
If the atm osphere in your room is very hum id or dam p, you can
rem ove excess hum idity w ithout low ering the room tem perature too
m uch.
1
If necessary, press the
(On/Off) button.
Result: The operation indicator on the indoor unit lights up.
◆
◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
It will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control, press the
button on the remote control one or more times until it appears.
Result:
◆
◆
The indoor unit beeps each time you press the
The air conditioner runs in DRY mode.
button.
No t e
You can change modes at any time.
3
To adjust the temperature, press the
button one or more times
until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result: ◆ Each time you press the button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆ The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4
To control the direction of the air flow, refer to page 17.
E-13
Airing Your Room
If the atm osphere in your room is stale, you can air the room using
the Fan feature.
1
If necessary, press the
(On/Off) button.
Result:
◆
The operation indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The indoor unit beeps.
2
If the
is not displayed at the top of the remote control,
press the
appears.
button on the remote control one or more times until it
Result:
◆
◆
◆
The indoor unit beeps each time you press the
The air conditioner runs in FAN mode.
The temperature is set automatically.
button.
No t e
You can change modes at any time.
3
Select the fan speed by pressing the
until the required setting is displayed:
button one or more times
Low
Medium
High
Result: Each time you press the
button, the indoor unit beeps.
4
To control the direction of the air flow, refer to page 17.
E-14
Selecting Energy Saving Mode
If you w ish to save energy w hen using your air conditioner, select the
Energy saving m ode w ith the Energy saving button.
1
If necessary, press the
(On/Off) button.
Result:
◆ The operation indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected
when the unit was last used.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2
Select COOL mode by pressing the
button.
No t e
You can select the Energy saving mode only in COOL mode.
3
4
Press the
Result:
button.
◆
◆
◆
◆
The indoor unit beeps.
The air conditioner runs in the Energy saving mode.
The outer air flow blade moves up and down.
To stop the Energy saving mode, press the
button again.
To adjust the temperature, press the
button one or more times
until the required temperature is displayed. Possible temperatures are
between 26°C and 30°C inclusive.
No t e
If you want to adjust temperature under 26°C, cancel the
Energy saving mode before adjusting the temperature.
5
6
To select the fan speed, press the
the required setting is displayed.
button one or more times until
To control the direction of the air flow, refer to page 17.
E-15
Generating anion
The air conditioner can generate anion w ith an ionizer in the indoor
unit. Since it is an additional function, you can select it any m ode,
even w hen the air conditioner is turned off.
1
Press the
Result:
button.
◆
◆
The air conditioner generates anion.
The indoor unit beeps.
No t e
If you press the
button during off, the air conditioner will
turn on automatically and generate anion in the Fan mode
with Low fan speed.
2
3
If you wish to stop the Anion function, press the
button again.
Result: The air conditioner is reset automatically to the previous mode,
temperature and fan settings.
To control the direction of the air flow, refer to page 17.
E-16
Adjusting the Air Flow Direction Vertically
Depending on the position of the indoor unit on the w all of your room ,
you can adjust the position of the outer air flow blade on the bottom
of the unit, thus increasing the efficiency of the air conditioner.
1
Press the
button one or more times as required.
Result: The outer blade is adjusted vertically.
RECOMMENDATION
When...
Adjust the blade to face...
Cooling
Heating
Upwards.
Downwards.
2
If you want the blade to move up and down automatically when the air
conditioner is operating, press the button.
Result: The blade move up and down, around the base position set.
3
To stop the blade moving up and down, press the
button again.
No t e
If you switch the air conditioner... Then the blade is...
Off
Closed completely.
Set to the initial position powered.
On again
Adjusting the Air Flow Direction Horizontally
There are tw o sets of inner air flow blades. J ust as the outer air flow
blade can be adjusted vertically, the inner blades can be adjusted
horizontally.
1
Adjust each set of inner blades to the required position, by pushing or
pulling them sideways.
E-17
Setting the On Timer
The On Timer enables you to sw itch on the air conditioner automatically
after a given period of time. You can set the period of time from
30 minutes to 24 hours.
1
To set the operating time, press the
button one or more times until the
required time is displayed. Possible time is between 0.5 hour and 24 hour
inclusive.
2
Press the
(Set/Cancel) button to complete the setting.
Result: ◆ The remaining time is displayed.
◆ Blinking of the timer indicator stops.
◆ The selected mode and the temperature on the display
disappear after 10 seconds.
◆ The air conditioner will switch on automatically when the
counter displayed on the remote control reaches the set time
and disappears the On timer setting.
3
To select an operating mode in advance, press the
button until the
desired mode is displayed at the top of the remote control.
Result: ◆ The air conditioner will run in the selected mode when it is
turned on.
To Cancel the On Timer
Press the
(Set/Cancel) button.
No t e
◆ If you press the
button when the Off Timer is set,
the Off Timer is also cancelled.
E-18
Setting the Off Timer
The Off Timer enables you to switch off the air conditioner automatically
after a given period of time. You can set the period of time from
30 minutes to 24 hours.
1
To set the operating time, press the
button one or more times until the
required time is displayed. Possible time is between 0.5 hour and 24 hour
inclusive.
2
Press the
(Set/Cancel) button to complete the setting.
Result: ◆ The remaining time is displayed.
◆ Blinking of the timer indicator stops.
◆ The air conditioner will switch off automatically when the
counter displayed on the remote control reaches the set time
and disappears the Off timer setting.
Exam ple If you would like to turn the air conditioner on after 2 hours
and to operate it for 2 hours:
1. Press the
2. Press the
3. Press the
4. Press the
button until ‘2.0 Hr’ is displayed.
(Set/Cancel) button.
button until ‘4.0 Hr’ is displayed.
(Set/Cancel) button.
No t e
You can see or change the setting mode and/or the temperature
by pressing the
Off timer.
button or the
button after setting the
To Cancel the Off Timer
Press the
(Set/Cancel) button.
No t e
◆ If you press the
button when the On Timer is set,
the On Timer is also cancelled.
E-19
Setting the Sleep Timer
The Sleep Tim er can be used w hen you are cooling or heating your
room to sw itch the air conditioner off autom atically after a period of
six hours.
No t e
If you w ish to sw itch the unit off at a specific tim e, refer to
page 19.
1
2
Make sure that you have selected either COOL or HEAT mode.
Press the button.
Result: ◆ The indoor unit beeps.
◆ The air conditioner will be controlled as indicated in the
illustrations below.
Cooling The desired temperature is
increased by 1°C every hour.
When it has been increased
by 2°C (after two hours), the
temperature is maintained for
four hours.
Heating The desired temperature is
decreased by 1°C every hour.
When it has been decreased
by 2°C (after two hours), the
temperature is maintained for
four hours.
To Cancel the Sleep Timer
If you no longer w ish to use the Sleep Tim er that you have set, you
can cancel it at any tim e.
Press the
Result:
button.
◆
◆
◆
The indoor unit beeps.
The
is no longer displayed.
The air conditioner operates normally.
E-20
Operating Recommendations
Here are a few recom m endations that you should follow w hen using
your air conditioner.
Topic
Recommendation
Heating performances
The heat pump inside the air conditioner
absorbs heat from outside air and brings it
indoors. If the temperature of the outside air
drops, the air conditioner will heat less. If you
find that the room is not warm enough, use an
additional heating appliance.
Warm air circulation
The air conditioner circulates warm air to heat
your room; as a result, some time will be
required after starting the air conditioner to
warm the entire room. If necessary, set the air
conditioner on before you wish to use the
room.
Frost
When outside temperatures are low and
humidity is high, frost may form in the outdoor
unit when heating is selected.
If this happens:
◆ The heating operation is stopped.
◆ The Deice mode is triggered automatically
for about seven minutes.
No intervention is required from you; after
about seven minutes, the air conditioner starts
operating again normally.
High indoor and outdoor If both the indoor and outdoor temperatures
temperatures
are high and you select the Heat mode, the
outdoor unit’s fan and compressor may stop at
times. This is normal; simply wait until the air
conditioner switches on again.
Power failure
If a power failure occurs when the air conditioner
is operating, the unit is switched off.
When the power returns, the air conditioner starts
up again automatically.
E-21
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges within which the air conditioner can be used.
If the air conditioner is used at...
Then...
High temperatures
The automatic protection feature may be triggered and the air conditioner stopped.
Low temperatures
A water leak or some other malfunction may occur if the heat exchanger freezes.
Water may condense on and drip from the surface of the indoor unit if it is used for long periods.
High humidity levels
Mode
Outdoor Temperature
Indoor Temperature
Indoor Humidity
Heating
Cooling
Drying
0°C to 24°C approx.
21°C to 43°C approx.
18°C to 43°C approx.
27°C or less
18°C to 32°C approx.
18°C to 32°C approx.
-
80% or less
-
◆◆ If the heating operation is used at below 0°C(outdoor temperature) then, it does not heat at its full capacity.
If the cooling operation is used at over 33°C(indoor temperature) then, it does not cool at its full capacity.
Operating Your Air Conditioner Without the Remote Control
Your air conditioner can be operated directly from the indoor unit if
the rem ote control is lost or broken.
1
2
Slide the lower front grille down.
To switch the air conditioner on, press the ON/OFF switch on the right
side of the indoor unit.
Result: ◆ The OPERATION indicator on the indoor unit comes on.
◆ The indoor unit beeps.
◆ The air conditioner starts up in the most suitable mode for
the room temperature:
Room Temperature
Less than 21°C
21°C or above
Operating Mode Temperature Setting
Heat
Cool
22°C approx.
24°C approx.
3
To switch the air conditioner off, press the ON/OFF switch again.
No t e
Even if the air conditioner has been switched on via the
ON/OFF switch, operations can still be controlled using the
remote control as usual.
E-22
Solving Common Problems
Before contacting the after-sales service, perform the follow ing sim ple checks.
They m ay save you the tim e and expense of an unnecessary call.
Problem
Explanation/Solution
The air conditioner does not
operate at all
◆ Check that the breaker used for the air conditioner is switched on.
◆ Check that the operation indicator on the indoor unit is on;
if necessary press the
(On/Off) button on the remote control.
◆ Check whether the TIMER indicator on the indoor unit is switched on.
If so:
- Wait until the switch-on time is reached and the air conditioner starts
up automatically
- Cancel the timer (see pages 18 and 19 for further details)
The air conditioner does not
operate with the remote control
◆ Check that there are no obstacles between you and the indoor unit.
◆ Check the remote control batteries.
◆ Check that you are close enough to the indoor unit (seven meters/
yards or less).
No beep is heard when you press
◆ Check that you are pointing the remote control at the remote control
sensor in the right of the indoor unit.
the
(On/Off) on the remote
control
◆ Replace the remote control batteries if necessary.
The air conditioner does not cool
or heat
◆ Check that the correct operating mode has been selected (AUTO,
COOL, HEAT).
◆ The room temperature may be too low or too high.
◆ Dust may be blocking the air filter guard; refer to page 24 for cleaning
instructions.
◆ Check that there is no obstacle in front of the outdoor unit.
When heating, the required room
temperature is never reached and
the air conditioner frequently stops
◆ Check that the required temperature has been set correctly.
◆ Increase the fan speed.
◆ If the air flow is directed upwards, use the remote control to direct it
downwards.
The fan speed does not change
◆ Check that the operating mode is set to COOL, HEAT or FAN ; in the
AUTO mode, the fan speed changes automatically and in the
DRY mode, it is set to AUTO.
when you press the
button
The air flow direction does
not change when you press the
button
◆ Check that the air conditioner has been switched on; if necessary,
press the
(On/Off) button on the remote control.
The timer is not correctly triggered
◆ Check that the timer has been programmed correctly; see pages 18
and 19.
Odours are permeated in the room ◆ Air the room.
during air conditioning
E-23
Cleaning Your Air Conditioner
To get the best possible use out of your air conditioner, you m ust
clean it regularly to rem ove the dust that accum ulates on the air filter.
Before cleaning your air conditioner, ensure that you
have sw itched off the breaker used for the unit.
IMPORTANT
1
2
Slide the lower front grille down.
Slide the upper front grille up slightly, then open the grille by pulling right
and left sides of the grille.
Grille support
3
4
Disassemble the upper front grille by opening the grille completely.
Lift out the bottom edge of the air filters and pull down to release them.
5
6
Remove all dust on the air filters with a vacuum cleaner or brush.
When you have finished, insert the top part of the filters into their slot
and push down on the bottom edge until they click into place.
7
8
Clean the front grille with a damp cloth and mild detergent (do NOT use
benzene, solvents or other chemicals).
Fix the left side of grille support, then insert the right side of grille support.
Body groove
Lower
front
grille
Not e ◆◆ If you have not used the air conditioner for a long period of time, set the fan
Hook
going for three to four hours to dry the inside of the air conditioner thoroughly.
◆◆To close the upper front grille completely after cleaning filters, turn on and turn off
the air conditioner.
Cleaning Deodorizing and Bio-Green filters (Option)
◆◆07/09◆◆
To rem ove m inute dust particles and odors, deodorizing and Bio-Green
filters are installed in the air conditioner. You should clean the filters
every 3 m onths.
Deodorizing filter
1
Open the upper front grille by pulling right and left sides of the grille.
2
Pull out the deodorizing and Bio-green filters.
Bio-Green Filter
◆◆12/18/24◆◆
3
4
Wash the filters with clean water, then dry them in the shade.
Insert the filters into the original position.
Bio-Green Filter
No t e
You can change the position of filters with each other.
5
Close the front grille.
Deodorizing filter
E-24
Technical Specifications
Model Indoor unit
Power Supply
AQ07P8GE
AQ07PBGE
SH07ZPG
SH07ZPGA
AQ09P8GE
AQ09PBGE
SH09ZPG
SH09ZPGA
AQ12PBGE
AQ12PGGE
SH12ZPG
220-240V~, 50Hz
SH12ZPGA
AQ18P0GE
SH18ZP0
SH18ZP0A
AQT24P6GE
SH24TP6
SH24TP6A
AQ12PGGB
AQ18P0GB
AQ24P6GB
220V~, 60Hz
E-25
THIS AIR CONDITIONER IS MANUFACTURED BY:
ESTE AIRE ACONDICIONADO HA SIDO FABRICADO POR:
CE CLIMATISEUR EST FABRIQUE PAR:
QUESTO CONDIZIONATORE D’ARIA È PRODOTTO DA:
ESTE APARELHO DE AR CONDICIONADO É FABRICADO POR:
DIESE KLIMAANLAGE IST FABRIZIERT VON:
AYTH H ™Y™KEYH KATA™KEYA™THKE A¶O:
ELECTRONICS
|
Zenoah G240rc User Manual
Webasto Automobile Parts Transit Model Engine Rear User Manual
Toshiba Ras B10gkvp E User Manual
Sunbeam Air Conditioner Y User Manual
Samsung Tipo Ventana Aw0800a User Manual
Samsung Ashm120ve User Manual
Nordic Star Products Mfc 3820cn User Manual
CRAFTSMAN 917.275662 User Manual
CRAFTSMAN 358.350370 User Manual
BLAUPUNKT GTX 1662 HN User Manual